Automatic Semi-Fluid Packing Machine (AH-BLT-500)

Model NO.: AH-BLT-500 Automatic Grade: Automatic Filling Valve Head: Single-Head Dosing Device: Plunger Packaging Container Lifting Structure: Pneumatic Lifting Packaging: Bag Air Pressure: 0.8MPa The Maximum Bag Size (L*W): 260*190mm Package Measurement: 100-500g Specification: SGS HS Code: 8422301090 Type: Volumetric Filling machine Material Type: Paste Feed Cylinder Structure: Single-Room Feeding Filling Principle: Pressure Structure: Rotary Packaging Material: Film Gas Source Gas: 80L/Min Packing Maximum Speed: 1200bags/H Trademark: anghua Origin: China 1. Automatic semi-fluid Packing machine main use.
Automatic semi-fluid packing machine AR-BLT500 uses measureing pump feeding and electonic control feeding, it has fast packing, stepless speed control, well-sealing ect. Technical features, widely suitable for drink, mdicine, chemical industry liquid and paste packing.

2. Automatic semi-fluid packing machine's features:
Back sealing, three-side sealing, four-side sealing packing method.
The packing data and adjustment can be displayed on the screen.
The user can directly operate it on it.
Assembled with a photoelectric controller to ensure that its packing bag figure are perfect.
It can automatically finish making-bag, metering, filling, sealing, cutting, counting and printing batch number.
The body and the parts touching the material are all made of stainless steel.

3. Automatic Semi-Fluid Packing Machine's Suitable Material:
It is applicable for packing the semi-fluid like hairdressing water, hair conditioner, lotion, soy sauce, cough syrup, agricultural chemicals, wine, sauce, cheese, peanut butter, ketchup, bean paste and chilli sauce etc.
The machine needs an air compressor to promote it to work better. The machine can pack fruit juice with pulp.

4. Automatic semi-fluid packing machine technical parameters
Production Rate: 1200~2100 bags/h (for paste like sesame sause, soy sauce, chilli sause and oil etc).
Packing Capacity: 100~500ml/bag (stepless adjustment)
Dimention of Film(mm): 240~320 (optional)
Length of Bag(mm): 50~200
Width of Bag(mm): 50-160
Main Motor Power: 1.1 KW
Offering membrane motor: 25W
Drawing membrane motor: 120W
Vertical Sealing Power: 1200W;
Transverse Sealing Power: 1200W.
Cross Weight of Machine: 500KG
Machine Overall Size: (LxWxH)180x100x240cm

5. Automatic semi-fluid packing machine functions
(1) Film Bag-shaping
(2) Ultraviolet sterilization
(3) Thermal vertical sealing
(4) Production date printing automatically
(5) Linear bag traction
(6) Quantitative filling
(7) Thermal transverse sealing
(8) Bag-cutting automatically
(9) Automatic counting

6. Automatic semi-fluid packing machine frequent problem and solution:

1. Problem
The whole machine does not work and the indicator does not light.
Likely cause and remedy
A) The electrician required to check powder supply and loss of phase or under-voltage.
B) Check main power supply is turned on or not.
C) Electrical components are in order or not.
2. Problem
The moving parts make abnormal noise.
Likely cause and remedy:
A) Lack of lubricant
B) The screws are loose and that results in the change of position of parts.
C) The moving parts are severely worn
3. Problem
The liquid is not sufficient or sometimes in large amount and sometimes in small amount.
Likely cause and remedy:
A) The screw on connecting rod is loose.
B) There are some foreign matters in the liquid inlet/outlet one-way valves.
C) There is air in liquid inlet pipe or the sealing is bad.
D) The crank sliding block pressure pad isn't pressed tightly.
E) The liquid level in material barrel is too high.
4. Problem
The bag is not in fixed length, sometimes long and sometimes short.
Likely cause and remedy:
A) Bag-feeding tong screw is loose; The rubber pad is worn or has oil dirt (With household detergent).
B) Stock-coiling damping swing link does not swing forward and backward normally.
C) Plastic film coiling is overweight.
5. Problem
The temperature of vertical and transverse hot sealing does not rise or is not stable.
Likely cause and remedy
A) Check the instrument is in order or not.
B) Check the temperature thermocouple is damaged or is loose and falls off.
C) Check the heating rube is damaged or not.
D) The power supply is out of phase; The connector lug is loose and falls off.

model	AH-BLT500
Air Pressure	0.8Mpa
The Maximum Bag Size (L*W)	260*190mm
Packing Maximum Speed	1200bags/h
Package Measurement	100-500g
Filling Accuracy	±1.2%
Dimension	1200*1100*2300mm
weight(kg)	430kg

Contact us if you need more details on Paste Packing Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Semi-Fluid Packing Machine、Automatic Paste Packing Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Paste Packing Machine